Course Category: Health and Safety
CPD & IIRSM Approved
CPD Units: 3
Duration: 75 minutes*

What’s covered

One of the most frequent reasons for workplace injuries is improper manual handling. This course provides an awareness of the risks that poor manual handling poses, safe handling methods, workable solutions to manual handling problems, and how to use mechanical aids.

The Manual Handling Operations Regulations were introduced to address issues with manual handling, and set our responsibilities of both employers and employees. As a general requirement these regulations state that employees must be trained in the proper manual handling of loads, including the use of any equipment their employer may provide.

This course covers the laws and regulations that apply to manual handling tasks as well as determining what falls under the category of manual handling. The course goes on to cover safe handling techniques, how to develop good habits in relation to manual handling, and introduces some practical solutions and the use of mechanical aids.

Please be aware that this is only an awareness course; if your duties involve manual handling, you will also need additional practical training. Contact us to make arrangements for this.

What you’ll learn

By the end of this course, you will be able to:

  • Define Manual Handling and state the correct technique and application of effective Manual Handling.
  • Understand the relevant legislation and comply with the regulations.
  • Recognise safe handling techniques and be able to develop good habits.
  • Evaluate every manual situation you encounter, recognising risks and when to use mechanical aids.
  • Understand the consequences on the body of incorrect handling and the dangers associated.
  • State the professionals most at risk from incorrect handling techniques.

Modules in this course

Module Number Module Name Pass % Required
1 What is Manual Handling? 75
2 Manual Handling Regulations 75
3 Safe Handling 75
4 Learning Safe Handling Habits 75
5 Practical Manual Handling Solutions 75
6 Use of Mechanical Aids 75

Want to know more?

Watch the introductory video below to learn more about this course.

Recommended system requirements

  • Browser: Up to date web browser
  • Video: Up to date video drivers
  • Memory: 1Gb+ RAM
  • Download Speed: Broadband (3Mb+)
* The course duration is based on the amount of video content shown and is rounded off. It does not account in any way for loading time or thinking time on the questions.
Course Category: Health and Safety