Qualitative Training
Competent Fit Test Operator Training - Qualitative Fit Testing
Our Fit Testing Training Consultants have a wealth of practical experience of face fit testing which really makes a difference to the quality of our training courses. We are able to provide practical guidance, advice and helpful hints and tips all gained from a working practical knowledge of face fit testing with every make and model of mask from P1, P2 & P3 disposable masks through to half masks, full face masks and BA.
Competent Qualitative Fit Test Operator Training is a Full Day course aimed at those who require an in-depth knowledge of Face Fit Testing using Qualitative Fit Test Methods. This course covers the Competent Fit Test Operator criteria set out in HSE282/28 and also provides helpful practical tips and guidance. |
Course Outline
Morning Session
Background to Face Fit Testing
Legislation and Guidance, HSE282/28
Set-up of Equipment
The Sensitivity Test
Fit Test Protocols
Pass Levels
Afternoon Session
PRACTICAL FACE FIT TESTING
Troubleshooting & Problem Solving
Fit Test Failures and Re-Tests
Planning & Managing a Fit Testing Program
Managing Data
|
Operator Training
Qualitative Fit TestingDownload the Fit Test Operator Training Brouchure |
Information Document HSE 282/28, recommends that RPE Fit Testing should only be conducted by a trained competent person. To be competent, the fit test operator should have adequate knowledge and have received adequate instruction and training in the following areas:
- Regulations and Guidance
- The Purpose and Applicability of Fit Testing
- Procedures for Selection of Adequate and Suitable RPE
- Fit Factors and Protection Factors
- Examination Procedures for RPE, Identification of Maintenance Problems
- Correct Donning Procedures and Pre-Use Fit Checks
- Qualitative and Quantitative Face-Fit Testing
- Sampling from the Facepiece
- Diagnostic Checks on Equipment
- Correct Fit Testing Procedures, Purpose of the Fit Testing Exercises
- Problem Solving
- Capabilities and Limitations of the Fit Testing Equipment
- Interpretation of Results
Our Respirator Face Fit Training courses are both theoretical and practical. They aim to give candidates the skills and knowledge to meet the requirements of HSE282/28 for Competency of Fit Testing Operators. |
Upcoming Courses
Portacount Training
16th Sept : Bristol
22nd Oct : Bristol
19th Nov : Bristol
Qualitative Fit Test Training
21st Sept : Birmingham
23rd Sept : Bristol
11th Oct : Bristol
21st Oct : Bristol
18th Nov : Bristol
Fit2Fit Coaching
17th Sept : Bristol
RPE Training
21st Sept : Birmingham
23rd Sept : Bristol
21st Oct : Bristol
18th Nov : Bristol
Email us for further details at
|
|
| |
|
|
